How much does a 10×20 / 12×20 / 20×20 patio cover cost?

How much does a 10×20 / 12×20 / 20×20 patio cover cost?

How much does a 10×20 / 12×20 / 20×20 patio cover cost? By the most-cited national size table, a 10×20 patio cover runs $10,000 to $22,500 installed, a 12×20 runs $12,000 to $36,000, and a 20×20 runs $20,000 to $60,000.

Those are HomeGuide’s 2026 figures for a permanent cover over an existing patio. Real bids move inside and sometimes below those ranges, because the price per square foot is not fixed — it falls as the cover gets bigger, and it depends heavily on whether the number belongs to a flat-pan kit or a custom cover framed on site. Those figures are a starting point for how much does a 10×20 / 12×20 / 20×20 patio cover cost, not a quote for your patio.

At a glance:

  • 10×20 (200 sq ft): $10,000–$22,500 in the national table
  • 12×20 (240 sq ft): $12,000–$36,000 in the national table
  • 20×20 (400 sq ft): $20,000–$60,000 in the national table; panel-system builds in the DFW market are quoted well below that (see the DFW comparison below)
  • The three sizes do not scale evenly: a 20×20 is four times the area of a 10×20’s smaller cousin, not four times the price
  • Material moves the number more than size does within these three footprints
how much does a 10x20 / 12x20 / 20x20 patio cover cost - a 10x20 cedar patio cover attached along the back of a home — the smallest of the three sizes in this cost guide
A 10×20 attached cover: 200 square feet, the most common starting size for a family patio.

Know your size? Get your exact price.

Pick the footprint that fits your patio and we will measure at your home in Argyle and put one written price on that exact cedar cover, sized to your slab and your roofline.

Get My Free QuoteCall (972) 471-9167

Cost by size: the three sizes side by side

Size Square feet National table range (installed) What drives the range
10×20 200 $10,000–$22,500 Material choice; attached is cheaper than freestanding
12×20 240 $12,000–$36,000 Only 20% more area than a 10×20, but longer spans can mean bigger beams
20×20 400 $20,000–$60,000 Widest spread of the three: panel systems at the low end, custom solid-roof builds at the top

Source: HomeGuide, “How Much Does a Covered Patio Cost? (2026)”. HomeGuide prices these at a flat per-square-foot rate and then applies that rate to each size; the 10×20 total is HomeGuide’s published figure, the 12×20 and 20×20 totals are the same rate applied to 240 and 400 square feet. That table is the quickest answer to how much does a 10×20 / 12×20 / 20×20 patio cover cost for each of the three sizes.

Why the price per square foot drops: how much does a 10×20 / 12×20 / 20×20 patio cover cost per square foot?

Some costs in a patio cover job do not care how big the cover is: the permit, the crew’s trip, the layout, and the inspection are roughly the same for a 10×20 and a 20×20. Spread those fixed costs over 400 square feet instead of 200, and the per-foot number falls, even though the total rises.

That is why the national table’s per-foot range narrows as size grows, and why a 20×20 can look like a bargain per foot while still costing twice as much in total. That fixed-cost effect is a big part of why how much does a 10×20 / 12×20 / 20×20 patio cover cost per square foot falls as the cover gets bigger.

How much does a 10×20 / 12×20 / 20×20 patio cover cost by material?

Material Installed $/sq ft 10×20 total (200 sq ft) Typical lifespan Maintenance
Fabric / shade sail Under $500 total, typical sail Under $500 2–5 years for the fabric Replace fabric; check tension and hardware
Aluminum $20–$50 $4,000–$10,000 20–30 years Low; rinse, inspect seals
Vinyl $25–$80 $5,000–$16,000 20+ years Low; wash occasionally
Insulated panels $30–$60 $6,000–$12,000 20+ years Low; check seams and flashing
Glass $20–$50 $4,000–$10,000 Long, if unbroken Frequent cleaning
Wood / cedar $60–$120 (HomeGuide); regional custom wood $45–$75 $12,000–$24,000 Decades, with upkeep Stain or seal every few years
Louvered Premium; priced per project See the DFW 20×20 comparison below 20+ years for the structure Mechanism needs periodic service

The 10×20 totals for aluminum, wood, and insulated panels are HomeGuide’s published figures for that size; the other rows are the same per-foot ranges applied to 200 square feet. To estimate a 12×20, multiply the per-foot range by 240; for a 20×20, by 400 — then remember the section above: real per-foot costs usually ease down as the size goes up. Material choice can move how much does a 10×20 / 12×20 / 20×20 patio cover cost more than the size difference between the three footprints.

A DFW comparison for the 20×20

One Denton-and-Collin-County builder publishes a 20×20 comparison that shows how far apart “a 20×20” can be depending on the product: solid aluminum $8,000 to $14,000, insulated $10,000 to $18,000, and motorized louvered $18,000 to $35,000 (Double T Patios, DFW louvered pricing guide). Those are panel and aluminum systems, not custom cedar framed on site — which is exactly the point. Before you compare any two numbers for the same size, ask which product each number belongs to. That comparison shows how much does a 10×20 / 12×20 / 20×20 patio cover cost can vary even for the same 20×20 footprint, depending on the system chosen.

A 12x20 cedar patio cover over a patio with an outdoor kitchen
A 12×20 in cedar: only 40 square feet more than a 10×20, but the longer span can call for heavier beams.

Attached vs. freestanding at 10×20, 12×20, and 20×20

At all three sizes, attached costs less than freestanding, and the gap widens with size. An attached cover borrows the house for one side of its support, so it needs fewer posts and fewer footings. A freestanding cover stands on its own: every corner needs a poured footing at roughly $200 to $400 each (EngineerFi), and a 20×20 freestanding span needs more structure in the middle, not just at the corners.

Permits follow the same pattern — an attached cover changes the house and draws more scrutiny at any size, while a freestanding structure is reviewed as a new structure with its own setbacks. For home value, an attached cover that matches the house usually presents as part of the home; a freestanding 20×20 reads as a pavilion, which suits a pool or a big yard better than a small one. Whether you choose attached or freestanding will change how much does a 10×20 / 12×20 / 20×20 patio cover cost, especially at the 20×20 size.

Cedar post set on a concrete footing — footing count is one reason freestanding covers cost more at every size
Every freestanding post lands on a poured footing. More size means more posts, and more posts mean more concrete.

What the price includes at these sizes

  • Materials: posts, beams, roofing, and hardware. The material bill scales with square footage more honestly than labor does — a 20×20 needs twice the roofing of a 10×20, and heavier beams for the longer span.
  • Labor: 40% to 60% of a professional quote. Labor grows with size, but not in a straight line — a crew already on site does not double its time for a cover that is twice the area.
  • Footings: roughly $200 to $400 each for freestanding work; attached covers need fewer.
  • Permits and inspections: mostly fixed regardless of which of the three sizes you pick, which is one reason the per-foot price falls with size.
  • Electrical: fans, lights, and outlets. On a 20×20, plan the layout early — one fan in the middle of 400 square feet does not cool the edges.

DIY vs. professional at 10×20, 12×20, and 20×20

A kit takes the labor out: materials for a covered patio run roughly $8 to $20 per square foot (EngineerFix), so a 10×20 kit lands at $1,600 to $4,000 in materials alone, and a 20×20 at $3,200 to $8,000, before footings, permits, tools, and your weekends

A professional build adds labor, footings, permits, and a warranty — and, for a 20×20, the structural work that a kit does not include. DIY makes sense for a small, simple, attached kit if you are comfortable with framing and permits; for a freestanding 20×20, most homeowners are better off with a builder who carries the structural liability. A kit changes how much does a 10×20 / 12×20 / 20×20 patio cover cost, because you pay for materials alone, not for professional labor, permits, and finishing.

Permits and codes for these sizes

Size matters to the permit office. Many cities set thresholds by square footage or height below which a cover may not need a full permit, and above which it does — and a 20×20 almost always crosses them. Attached covers also trigger roof and wall inspections that a small freestanding sail does not. Check with Argyle and your HOA before you buy materials: a cover that is built without a required permit can be a problem at resale, and moving a footing after concrete is poured is not a small job. Permit and inspection costs are mostly fixed, so they make up a smaller share of how much does a 10×20 / 12×20 / 20×20 patio cover cost as the cover gets bigger.

What these sizes cost in cedar, in Argyle

Argyle Patio Covers builds in cedar and wood only, framed on site, in Argyle and the surrounding Denton County towns. Our estimates start as low as $8,500, depending on what your project needs, and the price for your 10×20, 12×20, or 20×20 is one written number after a design visit at your home — with materials, labor, footings, permits, and electrical spelled out in it, so you can compare it honestly against any table in this post, including ours. Call (972) 471-9167 to schedule, or see our cedar patio covers and pergolas pages. For an Argyle cedar build, how much does a 10×20 / 12×20 / 20×20 patio cover cost depends on the roof style, site work, and any electrical work you add.

Want one of these three sizes priced for your yard? Call (972) 471-9167 or get a free quote here.

Frequently asked questions

Is a 12×20 much more expensive than a 10×20?

Not proportionally. A 12×20 is 240 square feet against the 10×20’s 200 — 20% more area — and the fixed costs (permits, crew, delivery) do not rise by 20%. Expect the total to rise by roughly 10% to 20% for the same material and attachment, not by the full area difference. In total dollars, how much does a 10×20 / 12×20 / 20×20 patio cover cost rises with area, but not in direct proportion to it.

Does a 20×20 patio cover need more posts?

Usually, yes. A 400-square-foot roof needs support across its span, not just at the corners — expect intermediate posts or larger beams, and on a freestanding build, a footing under every post at roughly $200 to $400 each. Post count is one of the details that affects how much does a 10×20 / 12×20 / 20×20 patio cover cost for a large, freestanding roof.

Why do quotes for the same size vary so much?

Because “a 10×20” is not one product. A flat-pan aluminum kit, an insulated panel system, and a custom cedar cover framed on site are three different builds at three different prices, and quotes also differ in what they include: footings, permits, and electrical are in some and missing from others. Compare the inclusions line by line. That is why a single quote does not settle how much does a 10×20 / 12×20 / 20×20 patio cover cost, so you need to compare the same product, material, and inclusions.

Which of the three sizes is the best value?

Per square foot, the 20×20 — fixed costs spread the furthest. In total dollars, the 10×20. The right answer is the size that covers the patio you actually use; an oversize cover’s value per foot does not help if half of it shades empty concrete. Per square foot, the 20×20 is the best value in how much does a 10×20 / 12×20 / 20×20 patio cover cost, even though its total price is the highest of the three.

Sources

  • HomeGuide, “How Much Does a Covered Patio Cost? (2026)”: https://homeguide.com/costs/covered-patio-cost
  • EngineerFix, “How Much Does a Covered Patio Cost?”: https://engineerfix.com/how-much-does-a-covered-patio-cost/
  • MasterMax Builders, “Patio Cover Cost in Sacramento — 2026 Price Guide”: https://mastermaxbuilders.com/blog/patio-cover-cost-in-sacramento-2026-price-by-material-size-and-style/
  • Double T Patios, “Motorized Louvered Pergola Cost Guide — DFW”: https://doubletpatios.com/blog/motorized-louvered-pergola-cost-guide-dfw/
  • Southern Home Improvement, “Patio Cover Cost — Louisiana (2026)”: https://southernhomeimprovement.com/patio-cover-cost-louisiana/

Ready to price your 10×20, 12×20, or 20×20 cover?

Book a visit at your home. We will measure the patio, confirm the size that fits, and leave you a design and one written price, with no pressure attached.

Get My Free QuoteCall (972) 471-9167

Share:

More Posts

How much does a 10×20 / 12×20 / 20×20 patio cover cost?

How much does a 10×20 / 12×20 / 20×20 patio cover cost? How much does a 10×20 / 12×20 / 20×20 patio cover cost? By the most-cited national size table, a 10×20 patio cover runs $10,000 to $22,500 installed, a 12×20 runs $12,000 to $36,000, and a 20×20 runs $20,000

Read More »

Send Us A Message

Scroll to Top

Book Your Free In‑Home Consultation